Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.
All heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.
All Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.
Carrillo employs fasteners jointly designed by Carrillo. They employ two different materials: H-11 tool steel (220,000 UTS) as well as Multiphase TM (285,000 UTS). All Carrillo fasteners employ a patented thread design as well as the highest dimensional integrity in the industry. Each lot is sample tested destructively for both ultimate tensile strength as well as fatigue.
The CARRILLO connecting rod is a precision, high strength, quality connecting rod, which when properly installed and maintained, will perform flawlessly in today’s racing and high performance internal combustion engines. We would like to offer some suggestions and specifications that should be helpful in your installation.
- See more at: http://www.cp-carrillo.com/Tech/RodTech/tabid/76/Default.aspx#sthash.sZoPidtl.dpuf
Carrillo uses proprietary chrome, nickel, moly, vanadium alloy which meets all VAR (vacuum arc re-melt ASTM standards). The heat is validated, both by the supplier and an independent metallurgist whom confirm the desired physical and chemical properties of steel.
All heat treat processes are via a mar-aged operation, resulting in UTS of 195,000 with a yield of 182,000 while maintaining the critical elements of low notch-sensitivity and ductility.
All Carrillo connecting rods are manufactured from an oversized forging resulting in the proper grainflow as well as the surface removal of any potential inclusions or surface conversions generated by the forging process. All critical CNC machines at Carrillo are equipped with probing to accurately validate dimensional integrity. In the production process each part is magnafluxed at least twice, further each piece is Rockwell tested to validate the heat treat procedure. A final shotpeen operation completes the part.
- See more at: http://www.cp-carrillo.com/Tech/RodTech/tabid/76/Default.aspx#sthash.sZoPidtl.dpuf
SA Connecting Rod; Straight Blade; Set of 4
- FITS: 2006+ Pontiac Solstice GXP, 2.0L and Saturn Sky Redline
SPECS:
- BE Bore: 2.0522in / 52.125mm
- PE Width: 0.945in / 24.00mm
- BE Width: 0.945in / 24.00mm
- Bolt Size: 3/8 WMC
- Length: 5.709in / 145.00mm
- Pin Dia: 23mm
Click here to >>
Download instructionsClick here to >>
View Feature Comparison
WARNING:This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov. This product has not been submitted for California CARB approval. Off-road use only in California and states adopting California emission standards.
