Hardware packet for Sonic Rear suspension brace
This hardware packet includes 2 bolts, 2 lock nuts and 2 aluminum shims.
This is a fairly easy install, but instructions are not currently available for this product, but here are a few important tips:
When installing the rear brace on the car, 2 1/2" holes need to be drilled. We can send a 1/2" drill bit along with your rear brace to make things a little easier for you. The Drill bit has a 1/2" shank, so make sure your drill can accept it before ordering it.
Torque bolts to 65 ft lbs. when installing.
If you have questions please call 864-438-4949 or text 864-907-6004.
- Fits: Chevy Sonic Rear Suspension brace by DDMWorks
- Installation note: Torque bolts to 65 ft lbs.
- WARNING:This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Q: Do you still offer the Sonic rear torsion bar brace, for sale? I don't find it offered anymore. reference DDM Works rear suspension brace 05, wedge type design
2 points will be rewarded to you when you buy this item.