Skip to Main Content

Stainless Steel intake comes with stainless steel mounting bracket and hardware

Stainless Steel intake comes with stainless steel mounting bracket and hardware

1990-1993 Miata Cold Air Intake for Jackson Racing Superchargers by DDMWorks

Write a Review

Your Price: $225.00

The Jackson Racing supercharger is a great way to add some power to your miata, and makes it drive like it should have come from the factory. However, the superchargers intake is not the best design. The Originalintake pulls hot air close to your exhaust header, up to 30 degrees hotter than ambient, decreasing the air available for the supercharger and lowering the power the supercharger can make. Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make. An extra benefit to our filter assembly is that it takes only a few seconds to remove the pod filter for routine cleaning. Give your supercharged Miata the intake it should have come with. If your car is a 1990-1997 and equipped with cruise control, you will need to relocate the cruise control actuator.

Questions about this item? Ask here.

Part Number: DDM-05-008

Availability: IN STOCK! Can ship right away!

DDMWorks Original Product!

Quantity

Description
Product Features
Questions and Answers
Instructions

The Jackson Racing supercharger is a great way to add some power to your miata, and makes it drive like it should have come from the factory. However, the superchargers intake is not the best design. The Originalintake pulls hot air close to your exhaust header, up to 30 degrees hotter than ambient, decreasing the air available for the supercharger and lowering the power the supercharger can make. Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make. An extra benefit to our filter assembly is that it takes only a few seconds to remove the pod filter for routine cleaning. Give your supercharged Miata the intake it should have come with.

If your miata is equipped with cruise control, you will need to relocate the cruise control actuator. Check out our relocation kit >> Cruise Control Relocation Kit

Fits: 1990-1993 Miata with Jackson Racing Superchargers
Fully enclosed
Drops intake temps up to 30 degrees
Maximizes power to supercharger
304 stainless steel
Stainless steel hardware
UNI foam filter

WARNING:This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.

This product has not been submitted for California CARB approval. Off-road use only in California and states adopting California emission standards.

56.25 points will be rewarded to you when you buy this item.

Cruise Control Relocation Bracket, Miata 1990-1997 by DDMWorks

Cruise Control Relocation Bracket, Miata 1990-1997 by DDMWorks

$75.00

Add to Wish List

UNI Filter Oil and Cleaning Kit

UNI Filter Oil and Cleaning Kit

$16.00

Add to Wish List

UNI Foam Filter, UP-4300

UNI Foam Filter, UP-4300

$23.95

Add to Wish List

[history_item_name]

[ITEMPRICE] ~~[ITEMPRICE] Original price~~ [ITEMSALEPRICE] Sale

Clear