HPS (High Performance Street) – Performance Street Compound When it comes to performance braking, there is no competition. This unique Ferro-Carbon compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. Much improved braking over OE and standard replacement brake pads. Recommended for import & domestic automobiles. Performance Ceramic – Luxury and Touring Compound Specially formulated ceramic composite developed to meet the ultra-low dust, low noise performance of OE ceramic brake pads. Performance Ceramic pads also feature a fade resistant, linear friction profile that produces improved braking over OE with smooth engagement characteristics. Performance Ceramic – quiet, clean & fast-stopping. Recommended for import & domestic automobiles, luxury SUV’s, sport trucks & vans. HP Plus – Autocross & Track Compound The HP Plus Ferro-Carbon material can take the heat at the track and get you home safely without having to change your brake pads. This compound was designed for autocross, Solo II, and Track Day applications. Warning! Due to the dramatic friction levels produced by this product to achieve race level braking; rotor wear, noise, dust and pad life may be affected. Blue 9012 - Race Compound Medium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA.

Brake Pad Installation Procedure

1. Install brake pads properly. Be sure pads are securely positioned in the caliper.
2. Flush system with fresh brake fluid.
3. Check all hydraulic parts for excess wear and tear.
4. Check disc for proper thickness, parallelism, and lateral runout.
5. Check disc for scoring or grooves over .012”depth. If either applies, resurfacing is required.
6. If discs do not need resurfacing, then contamination from the previous brake pads must be removed. Sand discs with 130 grit sandpaper using moderate pressure. Use soap and water to clean discs’ surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid.
7. Inspect calipers for freedom of movement. Lubricate where necessary.

Burnishing Instructions

1. After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
2. Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
3. DO NOT DRAG BRAKES!
4. Allow 15 minutes for brake system to cool down.
5. After step 4 your new pads are ready for use.

LEADING-EDGE BRAKE FRICTION TECHNOLOGY

Warranty

Hawk Performance will warranty products to be free of defects from workmanship and materials. This warranty does not apply to normal wear or damage caused by negligence, lack of maintenance, accident, abnormal operations, or improper installation or service. Hawk Performance does not make any other warranty claims, either expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose. In no event will Hawk Performance be liable for incident or consequential damages of any kind, whether such damages are claimed on account of breach of warranty, breach of contract, negligence, or strict product liability. This includes without limitation, damage to property, or other economic losses that may be incurred.

Any, and all, warranty claims must be processed through Hawk Performance.

All valid warranty claims will be replaced/reimbursed with Hawk Performance brake pads of equal or greater value.

Contact Hawk Performance at (440) 528-5000, or info@hawkperformance.com

click image to enlarge

HPS (High Performance Street) – Performance Street Compound
When it comes to performance braking, there is no competition. This unique Ferro-Carbon compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. Much improved braking over OE and standard replacement brake pads. Recommended for import & domestic automobiles.

Performance Ceramic – Luxury and Touring Compound
Specially formulated ceramic composite developed to meet the ultra-low dust, low noise performance of OE ceramic brake pads. Performance Ceramic pads also feature a fade resistant, linear friction profile that produces improved braking over OE with smooth engagement characteristics. Performance Ceramic – quiet, clean & fast-stopping. Recommended for import & domestic automobiles, luxury SUV’s, sport trucks & vans.

HP Plus – Autocross & Track Compound
The HP Plus Ferro-Carbon material can take the heat at the track and get you home safely without having to change your brake pads. This compound was designed for autocross, Solo II, and Track Day applications.
Warning! Due to the dramatic friction levels produced by this product to achieve race level braking; rotor wear, noise, dust and pad life may be affected.

Blue 9012  - Race Compound
Medium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA.

Hawk Front Brake Pads R50 & R53 Fits: 2002-2006 Mini Cooper and Cooper S

Hawk Rear Brake Pads Fits: R50, R53, R56 & JCW