DDMWorks

864-907-6004

	Filter Oil and Cleaning Kit
	UniFilters oil and cleaners are made specifically for the filter you recieve with your DDMWorks Cold Air Intake kits. They will provide the best in performance and maitanence for your filter.

	Please Choose your Product
	$5.95

Unifilter cleaning instructions:
With a grease cutting cleaning (Unifilter cleaning kit) saturate the entire foam element. If you are using the Foam Filter cleaner spray generous amounts of the cleaner on the inside and outside of the filter. Let the filter soak 3-4 minutes. Rinse the filter in warm water until clean. If your filter is very dirty you may need to repeat this process. Once the filter is thoroughly dry, re-oil your filter and install.

How to oil your filter:
Spray the filter inside and out until the filter with Unifilter Oil , until the filter is completely covered. Next, work the oil into the foam using your hands, you may want to wear rubber gloves for this process. Repeat this step once more, then dab filter with paper towels to remove excess making sure that the rubber mount flange is free of oil.

You might also be interested in...

Miata Filters	Mini Filters	Pit Crew "Hot Goods"