Solstice/Sky T-bolt Clamp Kit for 2.0L Charge Tubes by DDMWorks
On the car you will find that there is 6 worm drive hose clamps, these clamps have been known to leak at stock pressures, and at higher boost pressures can really be put to the test. We have put together a simple kit of the 6 hose clamps that you need to replace the worm drive clamps with the higher strength T-bolt clamps, giving you extra piece of mind when running higher boost. No special tools are required to swap the hose clamps and installation time varies with experience.
- WARNING:This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
Install these, even on a stock car!
Apparently my Solstice GXP had a minor boost leak from the factory cheap screw clamps. Before install the boost gauge would peak and hold about 13psi, now it peaks at 15 and holds 14. Install is a bit tricky if you don't take off the front bumper for easy access to the intercooler connections. I did it with the bumper on but it requires a bit of dexterity and patience. Don't think, buy these!Reviewed by: William Fisher from Bay Area, CA. on 1/21/2014
10 points will be rewarded to you when you buy this item.