864-438-4949
  • sales@ddmworks.com

1999-2005 Miata

Grid view
List view
Products (Total Items: 22)
Sort by:
Visor Frame
$9.99
It's finally here: A picture frame for your vehicle!
K&N Air Filter Cleaning Kit
$16.15
A six-step maintenance system designed to clean any K&N Air Filter. Restores air flow efficiency so your Filtercharger performs like new!
Oxygen Sensor Extender
$30.00
Oxygen Sensor Extender
UNI Filter Oil and Cleaning Kit
$15.95
Uni Filters oil and cleaners are made specifically for the filter you receive with your DDMWorks Cold Air Intake kits.
Filters for DDMWorks Miata Intakes
$20.95
A lot of testing goes into all of our products, and that includes the filters. We make sure that the filter we offer with our kits are not only the best fit, but the best performing!
Miata Windspinne rby DDMWorks
$29.95
Made of Stainless Steel this wind spinner can stand up to the weather much better than other spinners on the market that are made of aluminum that can rust. Hang it on your porch and be mesmerized as it spins in the wind!
Miata Ohlins Suspension Kit
$2,599.00
These shock absorbers are externally adjustable, allowing the damping to be tuned to the individual preference of the driver. It can also be stripped and rebuilt to individual requirements. The product range will be focused on high performance cars that tend to be driven hard by their owners.
Hawk Brake Pads, Miata 2001-2005 (Sport or Hard Suspension)
HPS (High Performance Street) – Performance Street CompoundWhen it comes to performance braking, there is no competition. This unique Ferro-Carbon compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports. Much improved braking over OE and standard replacement brake pads. Recommended for import & domestic automobiles.Performance Ceramic – Luxury and Touring CompoundSpecially formulated ceramic composite developed to meet the ultra-low dust, low noise performance of OE ceramic brake pads. Performance Ceramic pads also feature a fade resistant, linear friction profile that produces improved braking over OE with smooth engagement characteristics. Performance Ceramic – quiet, clean & fast-stopping. Recommended for import & domestic automobiles, luxury SUV’s, sport trucks & vans.HP Plus – Autocross & Track CompoundThe HP Plus Ferro-Carbon material can take the heat at the track and get you home safely without having to change your brake pads. This compound was designed for autocross, Solo II, and Track Day applications.Warning! Due to the dramatic friction levels produced by this product to achieve race level braking; rotor wear, noise, dust and pad life may be affected.Blue 9012 - Race CompoundMedium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA.
Stage 2 Cold Air Intake by DDMWorks
$349.95
It's finally here and it doesn't get any better than this! The DDMWorks Stage 2 is a fully enclosed Cold Air intake for the naturally aspirated 1999-2005 Miata. The DDMWorks Stage 2 intake replaces your stock restrictive air box and crossover tube with a beautiful Stainless Steel fully enclosed intake, 304 Stainless Steel crossover tube and K&N filter as well as all the hardware you will need for your install. The Stage 2 is an easy install with a BIG reward! You can feel the power right away and its� growl will make you PURRR!
Stage 1 intake, Entry Level Kit "Elk" for 1999-2005 Miata by DDMWorks
$99.95
The DDMWorks intake replaces your Miata's restrictive air box with a beautiful stainless steel heat shield and free flowing foam filter. It is a simple way to add a nice growl to your Miata and gives you some stylish under hood looks!

*** 99-05 Miata’s with ABS require the relocation of the windshield washer bottle or trimming of the heat shield to fit the intake system. A universal reservoir can be purchased from an auto parts store although there are no exact instructions.

Miata Cold Air Intake for Jackson Racing Superchargers by DDMWorks
$189.95
The Jackson Racing supercharger is a great way to add some power to your miata, and makes it drive like it should have come from the factory. However, the superchargers intake is not the best design. The original intake pulls hot air close to your exhaust header, up to 30 degrees hotter than ambient, decreasing the air available for the supercharger and lowering the power the supercharger can make. Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make. An extra benefit to our filter assembly is that it takes only a few seconds to remove the pod filter for routine cleaning. Give your supercharged Miata the intake it should have come with. If your car is a 1990-1997 and equipped with cruise control, you will need to relocate the cruise control actuator.
Average Rating
Crossover tube for cold-side supercharger, Miata 1999-2000 by DDMWorks
$175.00
Polished aluminum attaches directly to the cold air intake. Kit includes polished pipe, silicon couplers and hose clamps. The cold air intake is purchased seperately. Gain approximately 5 rwhp.
Square to round adapter for 90-93 Miata Air Flow Meter
$14.95
This is the same adapter that we use in our supercharger cold air intakes. When you need to put a universal filter on the front of a 1.6L miata air flow meter you will need one of these.
Cruise Control Relocation Bracket, Miata 1990-1997 by DDMWorks
$34.95
Not just a cheap piece of metal to hold the cruise control actuator, this engineered piece is precision made from 304 stainless steel and holds the cruise control actuator securely. Locates the cruise actuator in the same location Mazda put it on the second generation Miata's. the kit comes with the stainless bracket, 4' of vacuumm tubing and zip ties to secure the tubing in place. This relocation kit is needed when ordering a supercharger cold air intake.
Eibach Pro Kit 1999-2005
$300.00
1.2-inch Drop Front And 1.2-inch Drop Rear Pro-Kit The Eibach Pro-kit dramatically improves both a vehicle's performance and appearance. Front Spring Rate 140 linear. Rear 70/120 progressive.
Miata ACT Lightweight Flywheel - StreetLite
$323.92
Most stock flywheels are heavy cast iron parts designed for optimum street drivability by soaking up some of the power from the engine and putting it in storage in the form of inertia. Although this may be important for transporting the groceries, this drivability comes at the expense of engine response and acceleration. Light weight flywheels keep less inertia in storage but the lighter rotating mass provides significantly improved engine response and acceleration characteristics. Until now most aftermarket flywheels for sport compact vehicles presented certain undesirable concessions to the user. Many are too light or fragile for the application, others have reliability issues and all are very expensive. Finally, ACT offers exactly what performance enthusiasts need: all the benefits of a premium quality light weight flywheel at an affordable price.
Miata ACT Lightweight Flywheel - ProLite
$359.95
Most stock flywheels are heavy cast iron parts designed for optimum street drivability by soaking up some of the power from the engine and putting it in storage in the form of inertia. Although this may be important for transporting the groceries, this drivability comes at the expense of engine response and acceleration. Light weight flywheels keep less inertia in storage but the lighter rotating mass provides significantly improved engine response and acceleration characteristics. Until now most aftermarket flywheels for sport compact vehicles presented certain undesirable concessions to the user. Many are too light or fragile for the application, others have reliability issues and all are very expensive. Finally, ACT offers exactly what performance enthusiasts need: all the benefits of a premium quality light weight flywheel at an affordable price.
Miata Power Slot High Performance Brake Rotors
$140.00
Power Slot rotors always meet and/or exceed all OE specifications.
Miata KONI Adjustable Sport Shocks
$596.00
A great shock for the Miata. They seem to be a little higher quality then the KYBs and don't make any noise from the valving like the KYB's sometimes make. These also offer the three position spring perch that can be used to lower your Miata almost an inch even with stock springs. (Price per set)
Wilwood 570 Hi-Temp Brake Fluid
$9.95
Wilwood 570 Hi-Temp exceeds DOT 3 specifications. Since racing brake fluid is changed often (before every event is recommended) the dry boiling point is more important than the wet boiling point. Special ingredients provide excellent lubricating and cleaning qualities to help keep your brake system in top condition. Wilwood's Hi-Temp also has low viscosity to help prevent aeration and foaming when bleeding the brakes.Wilwood 570 Specifications:DOT Rating - 3Dry Boiling Point - 570°FWet Boiling Point - Wet 284°FCompatible with other fluids - YesContainer - 12 fluid ounce plastic bottle
Valve Cover Powder Coating Service
$275.00
No cores, no mess, we only offer brand new valve covers direct from dealer that are carefully prepared and powdercoated in your choice of color, this even includes a new valve cover gasket! We have brand new valve cover cores come in and then carefully prepare each one for the powder coating process.